laser laser_warmup_time tinit Green Ignored when "laser ver" set to 0 (no laser). If laser ver = 1 or 2 (Adlas laser or adlas laser integration mode), the default value of tinit is 10. It may be set as high as 20. If laser ver = 10 (Coherent laser), set tinit to 2. There is no feedback from the coherent laser to tell the firmware when the coherent laser is ready. Setting a 2 minute timeout gives the laser time to stabilize before the workstation is permitted to launch jobs. integer

10

0 to 254 [minutes]

cfg

../nvs/laser_cfg_ver.xmlNVS: laser ver

../nvs/laser_cfg_tcon.xmlNVS: laser tcon

..\..\ShowAllErrors.htmFirmware 0 Error Index

..\..\ShowAllCommands.htmFirmware 0 Command Index

..\..\ShowAllNVS.htmFirmware 0 NVS Index

Updated: Wed Jul 16 19:37:10 2008 PST